* Buy Together & Subscriptions orders are not eligible for Cashback
Free shipping over $25
Free Shipping on All Orders Over $25.
You may request a return within 30 days from the date the product is shipped.
All returns may be tentative on brand approval.
💚DIY Peter Pan Halloween Costume for Kids💚🎃👻
Family & Kids
> Kids Activities
1/2 yard green knit fabric
green polo shirt (mine was from Old Navy for $7)
2 sheets green felt
1 sheet red felt
1″ wide elastic
First up, LEGGINGS.
Step 1. Use a pair of baby leggings as a pattern and lay them, folded in half, flat on a piece of paper (parchment, medical, or regular paper all work). Cut around them to create a pattern piece. Then pin your pattern along the fold of your knit fabric and cut around them. Do this twice to create two legs for your leggings.
You should now have two identical leggings, like this:
Step 2. Open each leg up and fold the bottom of it up twice and then zigzag along it. [Alternatively, sew a double seam using a double needle.] Both will allow the fabric to stretch so you can slide the leggings easily. Repeat for the second leg.
Step 3. Place the two legs together with right sides together, and sew up the sides from the waistband to the crotch.
Step 4. Then fold the leggings in the other direction and sew the inseams from ankle to ankle, going across the crotch, as shown.
Step 5. Now let’s create a casing for the elastic. Fold the waistband over, creating a fold about 1 1/4″ tall. Sew around the waistband with a straight stitch at the bottom of the casing. Leave 3″ of the seam open so you can slide your elastic in.
Step 6. Attach a safety pin to the end of the elastic and feed it through the casing until both ends are sticking out. Sew the ends together securely, then tuck them inside the casing and sew up the 3″ of the casing. And you’re done with the leggings!
Next up, the shirt. This one is super easy!
Step 1. Start with a regular polo shirt. Use a seam ripper and remove all the buttons. Then take a marker and mark your zigzag cuts. Cut along the zigzags.
[Note: I bought 3 sizes bigger than normal so it would be a tunic length even after cutting the zigzag hem. You may need to take in the sides so it's not so baggy!]
And lastly, the hat!
Step 1. From your two pieces of green felt, cut two identical slanted triangles. Pin them together and sew up the two sides with a straight stitch, leaving the bottom open. Turn right-side-out and set aside.
Step 2. From your red felt, cut two identical feathers. Place them together and sew up the non-curved side with a straight stitch. Turn right-side-out. Then sew up the curved side.
Step 3. Cut a piece of wire and slide it inside the feather, securing the tip of the wire with glue or by folding the very tip over the felt so it doesn’t move around. Trim the wire down to the end of your feather.
Step 4. Place the feather where you want it on the hat and sew over the end of it to secure it in place. [Alternatively, you can glue it!] And you’re done with the hat!
Now put them all together, wrap a baby belt like this one from One Little Belt around that tunic, and throw on a pair of moccasins like these ones from Freshly Picked to complete the look!
Please like👍share💞save 💾follow me 👥for more great tips..😉😘
Join me on ipsy and subscribe to the Glam Bag! You get 4-5 beauty products every month delivered to your door, for just $10. Michelle Phan curates the bags! Check it out here: http://www.ipsy.com/r/jwcg