Musely
My order
  • $ 11% Cashback on all one-time purchases
    11% Cashback is available to all registered users and will be give in the form of Musely Coins.
    * Buy Together & Subscriptions orders are not eligible for Cashback
  • Free shipping over $25

    Free Shipping on All Orders Over $25.

    You may request a return within 30 days from the date the product is shipped.

    All returns may be tentative on brand approval.

DIY Leather Bracelet

posted in Fashion
06/04/2014
  • For the SILVER bracelet you will need:
- 2 pieces round leather cord in 2 different sizes. For ex 1mm & 1,5mm. Each about 60 cm long.
- a piece of the thinner (1mm) round leather cord about 2m long.
- 30+ beads w/ a large enough hole to thread onto the thinner leather
-a large hole bead (optional)
    For the SILVER bracelet you will need:
    - 2 pieces round leather cord in 2 different sizes. For ex 1mm & 1,5mm. Each about 60 cm long.
    - a piece of the thinner (1mm) round leather cord about 2m long.
    - 30+ beads w/ a large enough hole to thread onto the thinner leather
    -a large hole bead (optional)
  • Take the two 60cm pieces, bend them in half and place a knot with a little loop.
Try to have the thinner cord pieces in the middle of the thicker ones. All four will be your "carry"cords.
Thread all your beads on ONE of the thin carry cords. Secure with a knot.
    Take the two 60cm pieces, bend them in half and place a knot with a little loop.
    Try to have the thinner cord pieces in the middle of the thicker ones. All four will be your "carry"cords.
    Thread all your beads on ONE of the thin carry cords. Secure with a knot.
  • Now take your 2m piece and secure it around the "carry"cords with a knot.These will be your "working"cords.

  • Pull the first bead up on top and make a Makramee Square knot with your working cords.
Pull up the next bead and secure with the same kind of square knot (decide on left facing or right facing and stick to it). 
Make sure to pull each knot gently but tight.
    Pull the first bead up on top and make a Makramee Square knot with your working cords.
    Pull up the next bead and secure with the same kind of square knot (decide on left facing or right facing and stick to it).
    Make sure to pull each knot gently but tight.
  • Keep going until desired length is reached. Then take ALL ends and place a big knot.
Thats it! 
Optional thread the large hole bead and secure with another knot.
    Keep going until desired length is reached. Then take ALL ends and place a big knot.
    Thats it!
    Optional thread the large hole bead and secure with another knot.



Comments

0
See all comments

Related Tips

4.2K Followers