* Buy Together & Subscriptions orders are not eligible for Cashback
Free shipping over $25
Free Shipping on All Orders Over $25.
You may request a return within 30 days from the date the product is shipped.
All returns may be tentative on brand approval.
DIY Bow Back T-shirt
This summer, cutout and low back t-shirts have been extremely popular – you can find them in almost any store! These shirts are a perfect way to achieve a summery vibe and beat the heat. One of my favorite styles is the bow back t-shirt (see above); it creates such an effortlessly girly and chic look, and can easily be tucked into a skirt or worn with your favorite denim cutoffs. This DIY will show you how to make your own bow back t-shirt from an old tee you have lying around.
What you’ll need:
-An old t-shirt – although any cut will work, a scoop or crew neck will work best for this DIY
-Needle and thread OR sewing machine
-Seam ripper (Optional – for fixing mistakes!)
1. Lay out the washed and dryed shirt so you are looking at the back of it, making sure that the seams on each side are even and the entire shirt is flat. On the back make light pencil markings for how wide you want your cutout area to be and how far down the shirt you want it to go.
2. Begin cutting one half of a “U” shape in the back. Make sure you don’t cut through both sides! Try not to pull or move the shirt too much while you cut, and avoid closing the blades of the scissors all the way so you don’t get jagged edges. Once you have cut half of the U shape, stop cutting.
3. Fold the half “U” over to the other side of the shirt to use it as a guide. Cut along so both sides are even.
4. Cut out the pieces for your bow. Cut off the top of the “U” to make a rectangle, about 4 to 5″ tall. Cut another strip of fabric, about 1 inch tall. You should end up with 3 pieces, similar to the ones shown. You will only be using the top two pieces.
5. Make your bow using the fabric you just cut. Fold the larger rectangles like a fan- folds horizontal. Pull your needle and thread through the center to hold the folds in place. Using the strip of fabric, wrap the center of the fan. Cut off the excess length, and sew along the edge to form a loop
6. Align your bow. I found mine looked best when it was at the top so the neckline was continuous, but you can put it lower if you want. Turn your shirt inside out, then pin the bow so that the side of the bow you want facing outward is facing in, too. In other words, you’ll be looking at the “inside” of the finished product when you sew, so that the seam will be on the inside of the shirt. Try the shirt on inside out while it’s still pinned to make sure you like where the bow is.
7. Sew your bow in place. Make sure you knot or backstitch, since this area will receive a lot of strain. Turn your shirt right side out, and you’re done!